We use cookies on our website.
Some of them are necessary for the site to function, but you can decide for yourself.
$9,995
E-Z Drill 210B SRA 2015
SLAB RIDER CONCRETE CORE DRILLING MACHINE
Condition :
Pre-owned
Stock number :
005
Warranty :
No warranty
Vehicle Specs
Description
With the 210B SRA slab rider, you can stitch or drill horizontally, vertically or at an angle with exceptional accuracy and no disturbance to the subgrade. The unit can drill 5/8- to 2-1/2-inch-diameter holes to 18-inch depths, and it has an auto-alignment feature that tracks the hole placement level for fast and easy repositioning. A roller bearing feed system provides friction-free drilling for longer wear life, less maintenance and minimized downtime.
Horizontal Position
| Lower Length (A) | 46 in (116.8 cm) |
| Overall Length (A) + (C) | 94 in (238.8 cm) |
| Cart Length (C) | 48 in (121.9 cm) |
| Wheel Base (D) | 42 in (106.7 cm) |
| Width | 32 in (81.3 cm) |
| Height (E) | 32 in (81.3 cm) |
| Weight | 385 lbs (174.8 kg) |
| Drill Distance From Corner | 6 in (15.2 cm) |
| Drill Distance From Ground | 3 in (7.6 cm) |
| Drill Depth (std.) | 18 in (45.7 cm) |
| Drill Bit Diameter | 5/8 in to 2 1/2 in (15.9 mm to 63.5 mm) |
| Drill Distance From Wheel to Center of Bit (F) | N/A |
| Drill Motor (pneumatic) | CP 32A |
| Drill Motor Weight | 54 lbs (24.5 kg) |
| Chuck Size (std.) | 7/8 in x 3 1/4 in (22.2 mm x 82.6 mm) |
| Air Consumption (minimum) | 100 cfm (2.8 m 3 /min) |
| Operating Pressure | 90 psi (6.2 bar) |
Vertical Position
| Lower Length (A) | N/A |
| Lower Length (A) + (C) | 73 in (185.4 cm) |
| Cart Length (C) | 54 in (137.2 cm) |
| Wheel Base (D) | 48 in (121.9 cm) |
| Width | 54 in (137.2 cm) |
| Height (E) | Varies |
| Weight | 1,150 lbs (522.1 kg) |
| Drill Distance From Corner | N/A |
| Drill Distance From Ground | Up to 12 in (30.5 cm) |
| Drill Depth (std.) | 18 in (45.7 cm) |
| Drill Bit Diameter | 5/8 in to 2 1/2 in (15.9 mm to 63.5 mm) |
| Distance From Wheel to Center of Bit (F) | 21 1/2 in (54.6 cm) |
| Drill Motor (pneumatic) | CP 32A |
| Drill Motor Weight | 54 lbs (24.5 kg) |
| Chuck Size (std.) | 7/8 in x 3 1/4 in (22.2 mm x 82.6 mm) |
| Air Consumption (minimum) | 100 cfm (2.8 m 3/min) |
| Operating Pressure | 90 psi (6.2 bar) |
| Impact (ft. lbs./blow) | 36 fpb (49 J) |
$9,995